View MPC7410RXPEPND_213154.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Advance Information
MPC7410RXPEPNS/D Rev. 1, 10/2002 MPC7410 Part Number Specification for the MPC7410RXnnnPE Series
Motorola Part Numbers Affected: MPC7410RX450PE MPC7410RX500PE MPC7410RX550PE
This document describes part-number-specific changes to recommended operating conditions and revised electrical specifications, as applicable, from those described in the general MPC7410 Hardware Specifications (order #: MPC7410EC/D). Specifications provided in this document supersede those in the MPC7410 Hardware Specifications, for the part numbers listed in Table A only. Specifications not addressed herein are unchanged. Because this document is frequently updated, refer to http://www.motorola.com/semiconductors or to your Motorola sales office for the latest version. Note that headings and table numbers in this document are not consecutively numbered. They are intended to correspond to the heading or table affected in the general hardware specification. Part numbers addressed in this document are listed in Table A. For more detailed ordering information see Table 17.
Features Table A. Part Numbers Addressed by this Data Sheet
Operating Conditions Motorola Part Number MPC7410RX450PE MPC7410RX500PE MPC7410RX550PE CPU Frequency 450 MHz 500 MHz 550 MHz Significant Differences from Hardware Specification Vdd 2.0V50mV 2.0V50mV 2.0V50mV TJ (C) 0 to 65 Modified Voltage & Temperature Specification to achieve 450Mhz frequency 0 to 65 Modified Voltage & Temperature Specification to achieve 500Mhz frequency 0 to 65 Modified Voltage & Temperature Specification to achieve 550Mhz frequency
1.2 Features
This section summarizes changes to the features of the MPC7410 described in the MPC7410 Hardware Specifications, of which there were none.
1.4.1 DC Electrical Characteristics
Table 3 provides the recommended operating conditions for the MPC7410 part numbers described herein.
Table 3. Recommended Operating Conditions
Characteristic Core supply voltage PLL supply voltage L2 DLL supply voltage Processor bus supply voltage BVSEL = 1 or BVSEL = HRESET BVSEL = HRESET BVSEL = GND L2 bus supply voltage L2VSEL = 1 or L2VSEL = HRESET L2VSEL = GND Input voltage Processor bus L2 Bus JTAG Signals Die-junction temperature Vdd AVdd L2AVdd OVdd OVdd OVdd L2OVdd L2OVdd Vin Vin Vin Tj Symbol Recommended Value 2.0V 50mV 2.0V 50mV 2.0V 50mV 3.3V 165mV 2.5V 125mV 1.8V 90mV 2.5V 125mV 1.8V 90mV GND to OVdd GND to L2OVdd GND to OVdd 0-65 V V V V V V V C Unit V V V
Note: These are the recommended and tested operating conditions. Proper device operation outside of these conditions is not guaranteed.
2
MPC7410 Part Number Specification for the MPC7410RXnnnPE Series
MOTOROLA
DC Electrical Characteristics
Table 6 provides the power consumption for the MPC7410 part at the frequencies described herein.
Table 6. Power Consumption for MPC7410
Processor (CPU) Frequency 450Mhz Full-On Mode Typical Maximum Doze Mode Maximum Nap Mode Maximum Sleep Mode Maximum 2.13 2.25 2.37 W 1, 2 2.13 2.25 2.37 W 1, 2 4.5 5 5.5 W 1, 2 5.9 13.2 6.5 14.7 7.1 16.2 W W 1, 3 1, 2 Processor (CPU) Frequency 500Mhz Processor (CPU) Frequency 550Mhz
Unit
Notes
Sleep Mode--PLL and DLL Disabled Typical Maximum 0.5 2.0 0.5 2.0 0.5 2.0 W W 1, 3 1, 2
Notes: 1. These values apply for all valid processor bus and L2 bus ratios. The values do not include I/O Supply Power (OVdd and L2OVdd) or PLL/DLL supply power (AVdd and L2AVdd). OVdd and L2OVdd power is system dependent, but is typically <10% of Vdd power. Worst case power consumption for AVdd = 15 mw and L2AVdd = 15 mW. 2. Maximum power is measured at 65 C and Vdd = 2.0V while running an entirely cache-resident, contrived sequence of instructions which keep the execution units, including AltiVec, maximally busy. 3. Typical power is an average value measured at 65 C and Vdd = 2.0V in a system while running typical benchmarks.
MOTOROLA
MPC7410 Part Number Specification for the MPC7410RXnnnPE Series
3
DC Electrical Characteristics
1.4.2.1 Clock AC Specifications
Table 7 provides the additional clock AC timing specifications described in this document. Refer to the MPC7410 Hardware Specification for the remaining frequencies.
Table 7. Clock AC Timing Specifications
At recommended operating conditions (See Table 3)
450 MHz Characteristic Processor frequency VCO frequency SYSCLK frequency SYSCLK cycle time Symbol Min fcore fVCO fSYSCLK tSYSCLK 300 600 33 7.5 -- -- 40 -- -- Max 450 900 133 30 1.0 0.5 60 150 100
500 MHz Min 300 600 33 7.5 -- -- 40 -- -- Max 500 1000 133 30 1.0 0.5 60 150 100
550 MHz Unit Min 300 600 33 7.5 -- -- 40 -- -- Max 550 1100 133 30 1.0 0.5 60 150 100 MHz MHz MHz ns ns ns % ps s 2 3 4 5 6 1 Notes
SYSCLK rise and fall time tKR tKF SYSCLK duty cycle measured at OVdd/2 SYSCLK jitter Internal PLL relock time Note: See general hardware specification. tKHKL/tSYS
CLK
4
MPC7410 Part Number Specification for the MPC7410RXnnnPE Series
MOTOROLA
DC Electrical Characteristics
1.4.2.2 Processor Bus AC Specifications
Table 8 provides the processor bus AC timing specifications for the MPC7410 part described in this document.
Table 8. Processor Bus AC Timing Specifications
At Vdd=AVdd=2.0V50mV; 0 Tj 65C, OVdd = 2.5V0.125V and OVdd = 1.8V0.090V, 60X bus at 133MHz
Parameter
Symbol
450, 500, 550 Mhz Min Max -- --
Unit
Notes
Mode select input setup to HRESET HRESET to mode select input hold Setup Times: Address/Transfer Attribute Transfer Start (TS) Data/Data Parity ARTRY/SHD0/SHD1 All Other Inputs Input Hold Times: Address/Transfer Attribute Transfer Start (TS) Data/Data Parity ARTRY/SHD0/SHD1 All Other Inputs Valid Times: Address/Transfer Attribute TS, ABB, DBB Data Data Parity ARTRY/SHD0/SHD1 All Other Outputs Output Hold Times: Address/Transfer Attribute TS, ABB, DBB Data/Data Parity ARTRY/SHD0/SHD1 All Other Outputs SYSCLK to Output Enable SYSCLK to Output High Impedance (all except TS, ABB/AMON(0), ARTRY/SHD, DBB/DMON(0)
tMVRH tMXRH tAVKH tTSVKH tDVKH tARVKH tIVKH
8 0
tsysclk ns ns
2,3,4,5 2,3,5 10 6 -- 7 -- 8
1.4 1.4 1.4 1.4 1.4
-- -- -- -- -- ns
11 6 -- 7 -- 8
tAXKH tTSXKH tDXKH tARXKH tIXKH tKHAV tKHTSV tKHDV tKHDPV tKHARV tKHOV tKHAX tKHTSX tKHDX tKHARX tKHOX tKHOE tKHOZ
0 0 0 0 0
-- -- -- -- -- ns
12 6 -- 7 7 -- 9
-- -- -- -- -- --
3.0 3.0 3.5 3.5 2.3 3.0 ns
13 6 -- 7 -- 9
0.75 0.75 0.6 0.75 0.75 0.5 --
-- -- -- -- -- -- 3.5 ns ns
14 15
MOTOROLA
MPC7410 Part Number Specification for the MPC7410RXnnnPE Series
5
DC Electrical Characteristics Table 8. Processor Bus AC Timing Specifications (continued)
At Vdd=AVdd=2.0V50mV; 0 Tj 65C, OVdd = 2.5V0.125V and OVdd = 1.8V0.090V, 60X bus at 133MHz
Parameter
Symbol
450, 500, 550 Mhz Min Max 1.0 1 2
Unit
Notes
SYSCLK to TS, ABB/AMON(0), DBB/DMON(0) High Impedance after precharge Maximum Delay to ARTRY/SHD0/SHD1 Precharge SYSCLK to ARTRY/SHD0/SHD1 High Impedance After Precharge Notes: See General hardware specification.
tKHABPZ tKHARP tKHARPZ
-- -- --
tsysclk tsysclk tsysclk
4,15, 16,17 4,17 4,17
1.4.2.3 L2 Clock AC Specifications
Table 9 provides the L2CLK Output AC Timing Specifications for the MPC7410 part described in this document.
Table 9. L2CLK Output AC Timing Specifications
At recommended operating conditions (See Table 3)
450 MHz Parameter L2CLK frequency L2CLK cycle time L2CLK duty cycle Internal DLL-relock time DLL capture window Note: See general hardware specification. Symbol Min fL2CLK tL2CLK tCHCL/tL2
CLK
500 MHz Min 150 4.0 50 Max 250 6.67
550 MHz Unit Notes 1 Min 150 3.64 50 Max 275 6.67 MHz ns % -- 200 L2CLK ns 2 4 5
Max 225 6.67 50
150 4.4
640
-- 200
640
-- 200
640
6
MPC7410 Part Number Specification for the MPC7410RXnnnPE Series
MOTOROLA
DC Electrical Characteristics
1.4.2.4 L2 Bus AC Specifications
Table 10 provides the L2 Bus Interface AC Timing Specifications for the frequencies described in this document.
Table 10. L2 Bus Interface AC Timing Specifications
At Vdd=AVdd=L2AVdd= 2.05V50mV; 0 Tj 65C, L2OVdd = 2.5V0.125V and L2OVdd =1.8V0.090V
Parameter
Symbol
450, 500, 550 MHz Min Max 1.0
Unit
Notes
L2SYNC_IN rise and fall time Setup Times:
tL2CR & tL2CF
--
ns ns
1 2 2 3,4
Data and parity tDVL2CH Input Hold Times: Data and parity tDXL2CH Valid Times: All outputs when L2CR[14-15] = 00 All outputs when L2CR[14-15] = 01 All outputs when L2CR[14-15] = 10 All outputs when L2CR[14-15] = 11 Output Hold Times All outputs when L2CR[14-15] = 00 All outputs when L2CR[14-15] = 01 All outputs when L2CR[14-15] = 10 All outputs when L2CR[14-15] = 11 L2SYNC_IN to high impedance: All outputs when L2CR[14-15] = 00 All outputs when L2CR[14-15] = 01 All outputs when L2CR[14-15] = 10 All outputs when L2CR[14-15] = 11 Notes: See General Hardware Specification
tL2CHOZ tL2CHOX tL2CHOV
1.250 -- -
-- ns 0.0 ns 2.25 2.50 2.75 3.25
ns 0.5 0.9 1.3 1.7 -
3
ns 2.0 2.5 3.0 3.5
MOTOROLA
MPC7410 Part Number Specification for the MPC7410RXnnnPE Series
7
Document Revision History
1.9 Document Revision History
Table 16 provides a revision history for this part number specification.
Table 16. Document Revision History
Document Revision 0 1 Initial release. Minor formatting Section 1.10.1 - added Table 17 - Part Marking Nomenclature Substantive Change(s)
1.10 Ordering Information
1.10.1 Part Numbers Addressed by this Specification
Table 17 provides the ordering information for the MPC7410 part described in this document.
Table 17. Part Marking Nomenclature
MPC 7410
Product Code MPC Part Identifier 7410
RX
Package RX = CBGA
xxx
Processor Frequency1 450 500 550
x
Application Modifier P: 2.0 V 50 mV 0 to 65 C
x
Revision Level E: 1.4; PVR = 800C 1104
Notes: 1. Processor core frequencies supported by parts addressed by this specification only. Parts addressed by other specifications may support other maximum core frequencies.
8
MPC7410 Part Number Specification for the MPC7410RXnnnPE Series
MOTOROLA
Ordering Information
1.10.3 Part Marking
Parts are marked as the example shown in Figure 26.
MPC7410 RXnnnPE MMMMMM ATWLYYWWA
7410 Notes: BGA
nnn is the speed grade of the part MMMMMM is the 6-digit mask number ATWLYYWWA is the traceability code CCCCC is the country of assembly (this space is left blank if parts are assembled in the United States)
Figure 26. Motorola Part Marking for BGA Device
MOTOROLA
MPC7410 Part Number Specification for the MPC7410RXnnnPE Series
9
Ordering Information
10
MPC7410 Part Number Specification for the MPC7410RXnnnPE Series
MOTOROLA
Ordering Information
MOTOROLA
MPC7410 Part Number Specification for the MPC7410RXnnnPE Series
11
HOW TO REACH US: USA/EUROPE/LOCATIONS NOT LISTED: Motorola Literature Distribution P.O. Box 5405, Denver, Colorado 80217 1-303-675-2140 or 1-800-441-2447 JAPAN: Motorola Japan Ltd. SPS, Technical Information Center 3-20-1, Minami-Azabu Minato-ku Tokyo 106-8573 Japan 81-3-3440-3569 ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd. Silicon Harbour Centre, 2 Dai King Street Tai Po Industrial Estate, Tai Po, N.T., Hong Kong 852-26668334 TECHNICAL INFORMATION CENTER: 1-800-521-6274 HOME PAGE: http://www.motorola.com/semiconductors DOCUMENT COMMENTS: FAX (512) 933-2625 Attn: RISC Applications Engineering
Information in this document is provided solely to enable system and software implementers to use Motorola products. There are no express or implied copyright licenses granted hereunder to design or fabricate any integrated circuits or integrated circuits based on the information in this document. Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part.
Motorola and the Stylized M Logo are registered in the U.S. Patent and Trademark Office. digital dna is a trademark of Motorola, Inc. All other product or service names are the property of their respective owners. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. (c) Motorola, Inc. 2002
MPC7410RXPEPNS/D

▲Up To Search▲

Price & Availability of MPC7410RXPEPND

	To Download MPC7410RXPEPND Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .